Eaton xStorage Home 3P Скачать руководство пользователя страница 53 | Manualshive

Страница: 53 / 62

background image

49

XSTORAGE HOME 3P INSTALLATION MANUAL

MN700009EN August 2020 www.eaton.com

00

Title

Proceed as follows to switch off the system:

1.  Enable the inverter stand-by by placing the ON/OFF switch in the “0” position.
2.  Disconnect the DC switch (position 1).
3.  Disconnect the AC GRID and EPS (if present) circuit breakers.
4.  Disconnect the BATTERY circuit breaker (where present) and turn off the HV battery.
5.  Wait for the display to turn off.
6.  Do not carry out other operations on the inverter for at least 10 minutes. The inverter

contains capacitors that need a minimum time to discharge.

7.2 System switching off

Any repair or replacement of parts of the system must be performed exclusively by Eaton certified installers.
The repair or replacement of parts of the system by personnel who are not Eaton certified will immediately

invalidate the product guarantee.
Only genuine or Eaton approved spare parts must be used. Using no genuine spare parts or not Eaton

approved spare parts will immediately invalidate the product guarantee.
Immediately replace the components that do not appear in perfect conditions.

Before starting any maintenance operations, make sure that the system has been switched off, and that the

AC line external main switch has been set to off.

Do not carry out other operations on the inverter for at least 10 minutes. The inverter contains capacitors

that need a minimum time to discharge.

Never disconnect the AC or DC connectors connected to the xStorage Home 3P system before having

disconnected the protection switches (external and internal). Any disconnection of the connectors during

operation can generate large electrical arcs.

An electric shock can be fatal.
An electric discharge can set fire to the inverter.
An electrical discharge can cause fires capable of spreading to the surrounding areas.

It is absolutely forbidden to open the xStorage Home 3P system except as provided in this manual.

The xStorage Home 3P system must not be subjected to any type of modification.
If the operator does not comply with what is described, the manufacturer declines all responsibility.

In case of removing the front cover please pay attention do not damage the cables connected to the display

and the electronics boards.

7.1 General information

7. Maintenance

«
...
51
52
53
54
55
...
»

Содержание xStorage Home 3P































































Отзывы:

Нет отзывов

Похожие инструкции для xStorage Home 3P

Бренд: Ratoc Systems Страницы: 36

Бренд: Navigloo Страницы: 3

StorVize V7000 Gen2

Бренд: IBM Страницы: 188

Бренд: Yardmaster Страницы: 23

AP-SRFD255AXXXXR-G

Бренд: Apacer Technology Страницы: 18

Бренд: Olixir Страницы: 2

Бренд: National Instruments Страницы: 20

Бренд: Frontier Страницы: 6

G-SPEED SHUTTLE with Thunderbolt 3

Бренд: G-Technology Страницы: 8

AssuredSAN 4544

Бренд: Dot Hill Systems Страницы: 100

ST3500601XS-RK - 500 GB External Hard Drive

Бренд: Seagate Страницы: 16

Бренд: Seagate Страницы: 36

Бренд: HOGYME Страницы: 31

Бренд: 8BitMods Страницы: 15

Бренд: ABSCO SHEDS Страницы: 21

Бренд: DFI Страницы: 28

Бренд: Panasonic Страницы: 14

Бренд: Panasonic Страницы: 18

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды