Eaton xStorage Home 3P Скачать руководство пользователя страница 28

Страница: 28 / 62

XSTORAGE HOME 3P INSTALLATION MANUAL

MN700009EN August 2020 www.eaton.com

00 Title

Electromagnetic fields may have harmful effects (unknown to date) on the health of people who are

subjected to long exposure. Avoid standing for long periods of time at less than 20 cm from the inverter.

IP21

•

Housing protected from access of solid objects larger than 12.5 mm

•

Housing protected against dripping with a maximum tilt of 15 ° (degree)

The labels on the equipment must NOT be removed, damaged, soiled or hidden.
The labels must always be visible and in good conditions.
The technical data shown in this manual do not however replace those shown on the data plates on

the equipment.

The Eaton certified installer must be an expert in the field and must therefore be responsible for

commissioning the system according to the manufacturer’s instructions and local legislation. Should

electromagnetic interferences be detected, the Eaton certified installer must solve the problem by

contacting Eaton technical support representative.

In any case, electromagnetic interferences must be reduced so that they no longer cause disruptions. Use

the ferrite cores kit supplied in the box to limit electromagnetic disturbances according to the instructions

provided in this manual.

Connect to ground the xStorage Home 3P external frame or other conductive parts to ensure best protection

to the system and best safety to the operators.

National standards related to grounding must be complied with.

3.4 Electromagnetic fields and interferences

3.5 IP Protection class rating

3.6 Warning decals and rating plate

Содержание xStorage Home 3P































































Результаты поиска

Содержание xStorage Home 3P

Отзывы:

Похожие инструкции для xStorage Home 3P

Бренды по названию

Популярные бренды

Eaton xStorage Home 3P, Инструкция по эксплуатации

Результаты поиска

Содержание xStorage Home 3P

Отзывы:

Похожие инструкции для xStorage Home 3P

Бренды по названию

Популярные бренды