Eaton xStorage Home 3P Скачать руководство пользователя страница 51

Страница: 51 / 62

XSTORAGE HOME 3P INSTALLATION MANUAL

MN700009EN August 2020 www.eaton.com

Title

The xStorage Home 3P inverter provides one isolated change-over relay contact (4 A – 250 Vac max) which

allows activating secondary storage systems and / or domestic loads based on the state and energy balance

of the system.

WARNING:

To set the correct operation of the system with paralleled xStorage Home 3P units it is

necessary to access the “SETTINGS” configuration menu in INSTALLER mode and set the “SYSTEM”

parameters of the “IND. CAN” according to the characteristics of the system layout. Please refer to the

xStorage Home 3P user interface display manual. Moreover, INSTALLER mode is reserved only for Eaton

certified installers.

WARNING:

The system configuration with several xStorage Home 3P units in parallel is

possible up to a

maximum of 10 units.

WARNING:

The system configuration with several xStorage Home 3P units in parallel can only be carried

out by the AC GRID port.

The configuration of several units in parallel carried out by EPS port is

not permitted.

Any parallel connection of multiple units carried out by the EPS port can affect the correct

functioning of the system and relieves the manufacturer from all liabilities and invalidates the guarantee.

See the connection instructions shown in

Figure 18

WARNING: The relay contact can switch loads with absolute maximum ratings up to 4 A – 250 Vac.

If you intend to control loads with higher rated power, it is necessary to install an external switch and use

the xStorage Home 3P contact to create the control circuit of the external switch.

WARNING:

To set the contact operating mode it is necessary to access the “SETTINGS” configuration menu

and set the “LD1 - SMART LOAD” parameters of the “HOME AUTOMATION” menu according to the desired

energy management needs. Please refer to the xStorage Home 3P user interface display manual.

6.11 SMART LOAD Connection

Содержание xStorage Home 3P































































Результаты поиска

Содержание xStorage Home 3P

Отзывы:

Похожие инструкции для xStorage Home 3P

Бренды по названию

Популярные бренды

Eaton xStorage Home 3P, Инструкция по эксплуатации

Результаты поиска

Содержание xStorage Home 3P

Отзывы:

Похожие инструкции для xStorage Home 3P

Бренды по названию

Популярные бренды