Eaton xStorage Home 3P Скачать руководство пользователя страница 25 | Manualshive

Страница: 25 / 62

background image

21

XSTORAGE HOME 3P INSTALLATION MANUAL

MN700009EN August 2020 www.eaton.com

00

Title

For any doubts or problems regarding the use of the system, even if not described here, please contact the

Eaton certified installer or Eaton sales representative.
The xStorage Home 3P system must not be subjected to any type of modification. Eaton declines any

responsibility if the rules for correct installation are not respected and is not responsible for the system

upstream or downstream of the equipment it supplies.
The exclusion of protective devices is extremely dangerous and relieves the manufacturer of any

responsibility for damage to people and things.

A first aid kit must be provided. Do not underestimate burns or wounds.

3.1 Operating environment and restrictions

Each system must be used exclusively for the operations it was designed for and within the operative

ranges specified in the nameplate and / or in the relative technical datasheet, according to the national and

international safety standards.
Any use different from the intended use specified by the manufacturer is to be considered totally

inappropriate and dangerous and in this case the manufacturer declines all responsibility.
This equipment is an integrated system capable of converting a direct current (DC), coming from a

photovoltaic generator and a battery, into an alternating current (AC) suitable for use by local loads and / or

fed into the public grid.

Check the regulations applied by the electricity provider.
Check the solar panels manufacturer’s instructions.
Check the batteries manufacturer’s instructions.

Operating range limits:

The xStorage Home 3P system can only be used with photovoltaic modules that do not require the earthing

of one of the poles. xStorage Home 3P can only be used with photovoltaic modules that meet the specific

requirements of class A in accordance with the indications of the IEC 61730 standard.
Do not connect any other energy source to the inverters in addition to the modules described above. The

leakage current during normal operation must not exceed the limits specified in the technical characteristics.
A high voltage lithium-ion battery (HV) can be connected to the xStorage Home 3P system at the BAT input,

which acts as a storage element for the excess energy produced by the photovoltaic generator. The stored

energy is then released to the system which will make it available, at the time and in the most appropriate

way, to local loads in order to fully or drastically reduce the drawn of energy from the distribution network.
The xStorage Home 3P system can be connected to the distribution network only in the countries which the

system is certified for.
The xStorage Home 3P system can be used only respecting all the technical characteristics.

«
...
23
24
25
26
27
...
»

Содержание xStorage Home 3P































































Отзывы:

Нет отзывов

Похожие инструкции для xStorage Home 3P

Бренд: IBM Страницы: 230

Бренд: Omlet Страницы: 4

Бренд: RAID Страницы: 108

OCEAN SIDE 8435059720210

Бренд: Naterial Страницы: 28

CompactFlash 5000

Бренд: SanDisk Страницы: 20

Бренд: eazished Страницы: 12

1 GB Microdrive Storage Card

Бренд: IBM Страницы: 2

Бренд: KEHUA TECH Страницы: 51

Barracuda 5400.1 ST340015A

Бренд: Seagate Страницы: 2

Бренд: Kreg Страницы: 32

Бренд: PowerTec Страницы: 40

Бренд: Fujitsu Страницы: 40

ETERNUS2000 100

Бренд: Fujitsu Страницы: 21

Бренд: Fujitsu Страницы: 90

Бренд: Fujitsu Страницы: 12

Бренд: Fujitsu Страницы: 14

ETERNUS LT40 S2

Бренд: Fujitsu Страницы: 110

ETERNUS Multipath Driver V2

Бренд: Fujitsu Страницы: 140

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды