Eaton Rapid Link RAMO5, Руководство пользователя

Страница: 120 / 218

4 Operation
4.3 Manual control
116
Rapid Link 5 · RAMO5 · RASP5 10/19 MN034004EN www.eaton.com
4.3 Manual control
RAMO5 and RASP5 Rapid Link modules come with a manual controller
(local controller) as standard. This controller is made up of a key switch and,
in the case of RAMO-W and RASP5, of a direction selector switch.
The manual control allows:
• a simple commissioning
• local operation during setup and maintenance,
• manual operation of a single drive unit with the overall system in auto-
matic mode,
• secure (interlocked) manual operation within an area secured with limit
switches (
￫ section 2.9, “Sensor inputs I1 and I2”, page 57).
Figure 81: Key-switches
The key switch has three positions.
￫
The key is maintained in all switch positions and can be inserted
and removed in all positions.
Position Function Description
Automatic mode Automatic operation through
Manual mode Local operation, even without
Start enable is issued with the direction selector switch (FWD, REV) on
RAMO5-W and RASP5.
In the case of RAMO5-D, the start enable signal is sent using the key
switch (“Manual” position).
OFF/RESET From
Reset command In this position RAMO5 and RASP5 do not issue control signals.
0
I
II
OFF/RESET