Eaton Rapid Link RAMO5, Руководство пользователя

Страница: 192 / 218

10 Parameter list
10.4 Parameter groups for RASP
188
Rapid Link 5 · RAMO5 · RASP5 10/19 MN034004EN www.eaton.com
10.4.8 Parameter group 7 (“Motor”)
Table 41: Parameter group 7 (“Motor”)
Para-
meter Designation Description Unit Min Max DS
P7-01 Motor Identification Motor Identification
When set to 1, the drive immediately carries out a non-
rotating autotune to measure the motor parameters for
optimum control and efficiency. Following completion of
the autotune, the parameter automatically returns to 0.
Note:
This function cannot be activated by using the drivesCon-
nect software! When operating with Vector Control (P6-01
= 1) this parameter must be set to the motor nameplate
power factor (P7-02) before performing auto tune.
- 0 1 0
P7-02 Motor PF Power factor cos ϕ of the motor
When operating with Vector Control (P7-02 = 1) this param-
eter must be set to the motor nameplate power factor.
0.50 1.00 0.85
P7-03 Motor Stator Resistance R1 Stator resistance of the motor
For induction and PM motors: phase to phase resistance
value [Rs] in Ohms Ohms 0 655.35 Mod
Dep
P7-04 Motor Rotor Resistance R2 Rotor resistance of the motor
For induction motors: phase to phase resistance value [Rr]
in Ohms Ohms 0 655.35 Mod
Dep
P7-05 Motor Stator Inductance d-Axis Stator inductance of the motor, torque producing
For induction motors: Phase to phase inductance value in
Henry [H}
For PM-Motors: phase d-axis inductance value [Lsd] in
Henry [H] mH 0 6553.5 Mod
Dep
P7-06 Motor Stator Inductance q-Axis Stator inductance of the motor, magnetizing
For PM-Motors: phase d-axis inductance value [Lsd] in
Henry [H] mH 0 6553.5 Mod
Dep