Eaton Power XL SmartWire-DT DX-NET-SWD Series, Руководство пользователя

Страница: 73 / 97

4 Commissioning
4.5 Acyclic data
DX-NET-SWD... 08/14 MN04012009Z-EN www.eaton.com
69
2130 0 P3-11 - – RUN rw U16 PID1 fault ramp PID deviation from ramp
activation
2131 0 P3-13 P-49 – RUN rw U16 PID1 FeedbackWakeUp Actual value wakeup level
for controller
900
≙
90.0 %
2132 0 P3-18 – – RUN rw U16 PID1 ResetControl PID reset control
2150 0 P0-08 – – STOP ro PID1 setpoint PID setpoint value
2151 0 P0-09 – – STOP ro PID feedback 1
2152 0 P0-10 – – - ro PID 1 OUT
2200 0 P6-19 – – RUN rw U16 Braking resistance Braking resistance
2201 0 P6-20 – – RUN rw U16 P braking resistance Braking resistance output
2202 0 P6-21 – – RUN rw U16 Braking chopper
DutyCycle Braking chopper cycle in the
event of excessively low
temperature
2203 0 P6-17 – – RUN rw U16 Max torque timeout Time at maximum torque
after which a fault message
will be sent
2204 0 – P-34 – RUN rw U16 Brake chopper Brake chopper activation
For more information, please
refer to the manual for the
basic device.
2220 0 P6-18 – P-27 RUN rw U16 DCBrakingVoltage Used to define the DC
voltage, as a percentage of
the motor's rated voltage,
that will be applied to the
motor during DC braking.
2221 0 – P-32 P-25 RUN rw U16 DCBraking Used to define the operating
states in which DC braking
will be activated.
2223 0 – – P-28 RUN rw f-DC-Braking@Stop Percentage of the maximum
frequency at which DC
braking will start during the
deceleration phase.
2230 0 P6-11 – P-26 RUN rw U16 SpeedHold release time DC braking duration
2230 1 P6-12 – – RUN rw U16 SpeedHold inhibit time Speed holding time in the
event of inhibit
2250 0 P6-13 – – RUN rw U16 Brake release delay Motor brake release time
1 P6-14 – – RUN rw U16 Brake Apply delay Motor brake engagement
delay
2251 0 P6-15 – – RUN rw U16 Brake release M level Minimum torque for
releasing the brake
2252 0 P6-16 – – RUN rw U16 Brake timeout M level Minimum torque –timeout
2300 0 P6-06 – – RUN rw U16 Encoder PPR Encoder pulses per
revolution
2301 0 P6-05 – – RUN rw WORD Encoder actual value
enable Enable for encoder feedback
PNU
Index PNU
Subindex Parameter number in
specific device Access right Data type Name Description
DA1 DC1 DE1 RUN/
STOP ro/rw