Eaton Power XL SmartWire-DT DX-NET-SWD Series, Руководство пользователя

Страница: 72 / 97

4 Commissioning
4.5 Acyclic data
68
DX-NET-SWD... 08/14 MN04012009Z-EN www.eaton.com
975 0 ✓ ✓ ✓ STOP ro UInt16 PDP DO manufacturer
1 ✓ ✓ ✓ STOP ro UInt16 PDP DO device type
2 ✓ ✓ ✓ STOP ro UInt16 PDP DOFW interface xx.yy, decimal
Syntax: xx.yy
3 ✓ ✓ ✓ STOP ro UInt16 PDP DO FW year Firmware year in decimal
format
4 ✓ ✓ ✓ STOP ro UInt16 PDP DO FW DayMonth In decimal MM TT format
5 ✓ ✓ ✓ STOP ro UInt16 PDP DO NumberOfDOs 1 Do not read-out
6 ✓ ✓ ✓ STOP ro UInt16 PDP DO subclass 1
976 0 ✓ ✓ P-37 STOP rw UInt16 Parameter Set The default settings will be
restored if this parameter is
set to 1.
977 0 P6-29 – – STOP rw WORD Save parameters Save parameters as default
0: deactivated
1: activated
980 0 ✓ ✓ ✓ STOP rw UInt16 PDP DefPara0
2100 0 P3-01 P-41 – RUN rw U16 PID1 Kp The controller's Kp
component
10
≙ 1.0
2101 0 P3-02 P-42 – RUN rw U16 PID1 Ti The controller's integral
component
10
≙
1.0
2102 0 P3-03 – – RUN rw U16 PID1 Kd Derivative term
10
≙
1.0
2110 0 P3-05 P-44 – RUN rw U16 PID1 setpoint 1 source Used to select the setpoint
source
For more information, please
refer to the manual for the
basic device.
2111 0 P3-06 P-45 – RUN rw U16 PID1 digital setpoint Digital setpoint value
10
≙
1.0
2112 0 P3-10 P-46 – RUN rw WORD PID1 feedback 1 source Used to select the process
value source
For more information, please
refer to the manual for the
basic device.
2113 0 P3-12 – – RUN rw U16 PID1 feedback 1
DispScale Scaling factor for actual
value display
2120 0 P3-08 – – RUN rw U16 PID1 Out lower limit Lower PID output limit
2121 0 P3-07 – – RUN rw U16 PID1 Out upper limit Upper PID output limit
2122 0 P3-09 – – RUN rw U16 PID1 OutCalc Used to select the PID output
limit
2123 0 P3-04 P-43 – RUN rw WORD PID1 Mode Operation Mode
0: direct operation
1: Inverted operation
PNU
Index PNU
Subindex Parameter number in
specific device Access right Data type Name Description
DA1 DC1 DE1 RUN/
STOP ro/rw