Eaton OPTE9, Руководство по установке, Страница: 81 / 90

77
13. Appendix 3 – Operating an SVX Drive with a Siemens PLC via PROFINET
Dual port ethernet option board installation manual
MN032004EN October 2017 www.eaton.com
The PLC will be displayed. In the Catalog at the far right,
select the arrow next to “Other field devices”, then next to
PROFINET IO / Drives / VACON/ Vacon Drives/OPTE9. Drag
and drop the device called OPTE9 below the controller/
PROFINET master on the Network View screen. Then select
the green square on the PROFINET master and drag it to
the green square on the OPTE9 and release the mouse
button. The following should now be displayed:
Figure 41.
The Profibus network has been created in the offline
project. Double click the OPTE9 module and the following
will be displayed:
Figure 42.
Double click the OPTE9 box and its Properties will open
below it as follows:
Figure 43.
Change the PROFINET IP Address under the “PROFINET
interface” category to match the address se-lected for the
OPTE9.