Eaton OPTE9, Руководство по установке, Страница: 48 / 90

44
9. Ethernet/IP
Dual port ethernet option board installation manual
MN032004EN October 2017 www.eaton.com
9.2 Common industrial objects implemented by the OPTE9
9.2.1 Cip common required objects
9.2.1.1 Identity object, class 0x01
The Identity Object provides identification of and general
information about the device.
Table 89. Identity object
Class name Identity Object
Class identifier 1
Class attributes
Id Access rule Name Datatype Description
1 Get Revision UINT Class revision (1)
2 Get Max Instance UINT Maximum instance number (1)
3 Get Number of Instances UINT Number of object instances (1)
Class services
Id Name Description
1 Get_Attributes_All Get all attributes
14
d
0E
h
Get_Attribute_Single Get single attribute
Instance attributes
Id Access rule Name Datatype Description
1 Get Vendor ID UINT Vendor identification
2 Get Device Type UINT General type of product
3 Get Product Code UINT Product identification
4 Get Revision STRUCT of Revision of the item the Identity Object
represents
Major Revision USINT
Minor Revision USINT
5 Status WORD Summary status of device
6 Serial number UDINT Serial number of the device
7 Product Name SHORT STRING Human readable identification
Id Name Description
Instance services
1 Get_Attributes_All Get all attributes
5 Reset Only reset type 0
14
d
0E
h
Get_Attribute_Single Get single attribute
9.2.1.1.1. Instance attributes
Instance attribute “Vendor ID”
This number is assigned to vendors of CIP devices by the
ODVA user organization. The vendor ID for Eaton Plc is
01BB
h
(443
d
).
Instance attribute “Device Type”
This attribute indicates which device profile is implemented
by the device. For Eaton drives this device number is
02
h
(“AC Drive” profile).
Instance attribute “Product Code”
This attribute reveals the vendor-assigned product code for a
particular product within a device type.
Separate products must have different product codes if their
configuration and/or runtime options are different.
OPTE9 will return the product code value based on the drive
where the option board has been installed. This value can
also be modified with the “Product Code Offset” parameter
(see Chapter 6 “Commissioning”).
When the “Mode” setting is set to “SVX/SPX Mode”, setting
the “Product Code Offset” has no affect and OPTE9 will
emulate the OPTCQ option board and return value to 2.
Table 90. Drive type specific product code values
Drive type Product code base value
SVX/SPX drives 1200
Emulating OPTCQ 2