Eaton OPTE9 Скачать руководство пользователя страница 42

Страница: 42 / 90

8. Profinet IO

Dual port ethernet option board installation manual

MN032004EN October 2017 www.eaton.com

the FBFixedStatusWord.

8.4.3.1.9. Vendor-specific fbgeneralcontrolword

FB General Control Word is 16-bit in length and it is

completely application-dependent.

8.4.3.1.10. Vendor-specific fbgeneralstatusword

FB General Status Word is 16-bit in length and it is

completely application-dependent.

8.4.3.1.11. Vendor-specific process data

The Process Data variables are vendor-specific variables

that can be communicated to and from the drive. There

can be up to eight Process Data variables communicated

in a single telegram. Values sent from the option board

to the master are called ProcessDataOut variables, while

the values sent from the master to the option board

are called ProcessDataIn variables. The contents of the

ProcessDataOut variables can be parameterised in the drive

using a feature known as Fieldbus Process Data mapping.

See the drive’s Application Manual for further details.

8.4.3.2 PROFIDrive standard telegram 1 and

vendor-specific variants

These telegrams use the PROFIDrive-defined control

word, status word, speed setpoint value and speed actual

value. It is also possible to use up to eight Process Data

fields. Using these telegrams, the process data fields are

communicated as 16-bit values.

Table 67. PROFIDrive standard telegram

Telegram no.

Telegram

Standard telegram 1

102

Standard telegram 1 + PD1

103

Standard telegram 1 + PD[1..2]

104

Standard telegram 1 + PD[1..3]

100

Standard telegram 1 + PD[1..4]

105

Standard telegram 1 + PD[1..5]

106

Standard telegram 1 + PD[1..6]

107

Standard telegram 1 + PD[1..7]

101

Standard telegram 1 + PD[1..8]

8.4.3.2.1. Setpoint data

Standard telegram 1 – setpoint data

Table 68. PROFIDrive standard telegram 1 – setpoint data

Standard telegram 1

Additional process Data (16-bit each)

STW1

(16-bit

NSOLL_A

(16-bit)

PDI1 PDI2 PDI3 PDI4 PDI5 PDI6 PDI7 PDI8

STW1 (16-bit) (See 8.4.3.1.1. STW1 – Control Word 1 31)
NSOLL_A (16-bit) (See 8.4.3.1.3. PROFIDrive speed setpoint

value NSOLL_A)
PDI1-PDI8 (See 8.4.3.1.11. Vendor-specific Process Data)

8.4.3.2.2. Actual data

Standard telegram 1 – actual data

Table 69. PROFIDrive standard telegram 1 – actual data

Standard telegram 1

Additional process Data (16-bit each)

ZSW1

(16-bit)

NIST_A

(16-bit)

PDO1 PDO2 PDO3 PDO4 PDO5 PDO6 PDO7 PDO8

ZSW1 (16-bit) (See8.4.3.1.2. ZSW1 – Status Word 1 32)
NIST_A (16-bit) (See 8.4.3.1.4. PROFIDrive speed actual

value NIST_A)
PDO1-PDO8 (See 8.4.3.1.11. Vendor-specific Process Data)

8.4.3.3 Vendor-specific telegram 1 and its variant

These telegrams use the vendor-specific control word,

status word, speed setpoint value and speed actual value.

It is also possible to use up to eight vendor-specific Process

Data fields. Using these telegrams, the process data fields

are communicated as 16-bit values.

Table 70. Vendor-specific telegram 1

Telegram no.

Telegram

108

Vendor-specific Telegram 1

109

Vendor-specific Telegram 1 + PD1

110

Vendor-specific Telegram 1 + PD[1..2]

111

Vendor-specific Telegram 1 + PD[1..3]

112

Vendor-specific Telegram 1 + PD[1..4]

113

Vendor-specific Telegram 1 + PD[1..5]

114

Vendor-specific Telegram 1 + PD[1..6]

115

Vendor-specific Telegram 1 + PD[1..7]

116

Vendor-specific Telegram 1 + PD[1..8]

8.4.3.3.1. Setpoint data

Vendor specific telegram 1 – setpoint data

Table 71. Vendor-specific telegram 1 – setpoint data

Vendor-specific telegram 1

Additional process data (16-bit each)

Fixed

(16-bit)

Speed

Reference

16-bit)

PDI1 PDI2 PDI3 PDI4 PDI5 PDI6 PDI7 PDI8

FB Fixed CW (16-bit) (See 8.4.3.1.5. Vendor-specific

FBFixedControlWord)
FB Speed Reference (16-bit) (See 8.4.3.1.6. Vendor-specific

FBSpeedReference) PDI1-PDI8 (See 8.4.3.1.11. Vendor-specific

Process Data)

Содержание OPTE9



























































































Результаты поиска

Содержание OPTE9

Отзывы:

Eaton OPTE9, Руководство по установке, Страница: 42 / 90

Результаты поиска

Содержание OPTE9

Отзывы: