11
SIT-TO-STAND TECHBENCH INSTALLATION MANUAL
Eaton.com/techbench
Sit-to-Stand Techbench
Installation Manual
E. Leg assembly and back panel
•
On one end of back panel, align back panel holes with
back panel mounting holes in leg assembly� Hand thread
(1)1/4-20 x ¾" lg hex head screw hardware M�
•
Slide opposite leg assembly towards back panel and
align holes in panel with mounting holes in leg assembly�
Hand thread (3) 1/4-20 x ¾" lg� hex head screws�
•
Hand thread remaining (2) 1/4-20 hex head screws in back
panel�
Do not tighten
Back panel
mounting
holes
Back panel
#
1
/
4
-20 x 3/4
hex head
machine
screw M x 6
SECTION III - Assembling the corner
and linear bench
M x 6
Hardware
required
Back panel
mounting holes
