21
SIT-TO-STAND TECHBENCH INSTALLATION MANUAL
Eaton.com/techbench
Sit-to-Stand Techbench
Installation Manual
SECTION VI -User maintenance Instructions
WARNING
THIS BENCH DOES NOT HAVE ANY USER SERVICEABLE
PARTS. ALL SERVICING EXCEPT CLEANING AND PERIODIC
VISUAL INSPECTION SHALL BE PERFORMED BY AN EATON
AUTHORIZED SERVICE REPRESENTATIVE.
THIS BENCH’S ELECTRICAL LIFT SYSTEM HAS DOUBLE-
INSULATED COMPONENTS. IN A DOUBLE-INSULATED
PRODUCT, TWO SYSTEMS OF INSULATING ARE PROVIDED
INSTEAD OF GROUNDING. NO GROUNDING MEANS ARE
PROVIDED ON A DOUBLE-INSULATED PRODUCT. SERVICING A
DOUBLE-INSULATED PRODUCT REQUIRES EXTREME CARE
AND KNOWLEDGE OF THE SYSTEM AND IS TO BE DONE ONLY
BY QUALIFIED SERVICE PERSONNEL. REPLACEMENT PARTS
FOR A DOUBLE-INSULATED PRODUCT MUST BE IDENTICAL TO
THE PARTS THEY REPLACE. A DOUBLE-INSULATED PRODUCT
IS MARKED WITH THE WORDS “DOUBLE INSULATION” OR
“DOUBLE INSULATED”. THE SYMBOL (SQUARE
WITHIN A SQUARE) SHOWN HERE; IS ALSO ABLE
TO BE MARKED ON THE PRODUCT
Care and cleaning
If during operation, the product makes unusual noise or
odors, immediately unplug the cabinet from the receptacle(s)�
Contact technical assistance for help using the contact
information in section 1 of this installation manual�
Every six months
Visually inspect the product looking for loose fasteners and
loose or damaged parts� Inspect all wires and cables looking
for loose connections and pinched or frayed wires�
Laminated worksurface care and cleaning
Avoid placing hot items and heat-producing appliances on
the worksurface� When set directly upon the worksurface,
hot objects can damage the laminated surface�
To clean the surface, use a damp cloth or sponge and a
mild soap or detergent� Difficult stains such as coffee or tea
can be removed using a mild household/industrial cleaner
and a soft bristled brush, repeating as necessary� If a stain
persists, use a paste of baking soda and water and apply
with a soft bristled brush� Light scrubbing for 10 to 20
strokes should remove most stains� Excessive scrubbing
or exerting too much force could damage the decorative
surface�
Recommended cleaners for work surfaces
Windex
®
Glass Plus
®
Lestoil
®
Grease Relief
®
Dawn
®
Fantastik
®
Favor
®
Pledge
®
Mr� Clean
®
TOP JOB
®
Formula
409
®
Clorox
®
Isopropyl Alcohol (Isopropanol), or similar
standard industrial cleaners�
NOTICE
PROLONGED EXPOSURE TO BLEACH OR CLEANERS
CONTAINING BLEACH WILL CAUSE DISCOLORATION.
Painted surface cleaning
Wash your painted surfaces at least once every six months�
1� Combine 1 gallon of water with one cup of a neutral
detergent in a bucket�
2� Wipe the painted surfaces with a clean rag dampened
with the cleaning solution� Use gentle repetitive
pressure to remove built up grime� Avoid excessive
scrubbing� Do not use abrasive products or scrubbing
pads�
3� Rinse the painted surfaces with an unused clean rag,
dampened with clean, clear water�
4� Finally, wipe the surfaces with a dry clean rag to prevent
streaking and spotting�
Eaton
1000 Eaton Boulevard
Cleveland, OH 44122
United States
Eaton�com
© 2019 Eaton
All Rights Reserved
Printed in USA
Publication No� IB212001EN
October 2019
Follow us on social media to get the
latest product and support information.
Eaton is a registered trademark�
All trademarks are property
of their respective owners�
