10
Sit-to-Stand Techbench
Installation Manual
SIT-TO-STAND TECHBENCH INSTALLATION MANUAL
Eaton.com/techbench
D. Wiring the leg assembly
•
Position Both left and right leg assemblies in work
surface stiffeners-position lift motors about 1" from there
mounting position as shown�
•
Connect each lift motor cables to the respective lift
motor� A click is audible when the connection is made�
•
Remove cable from wire stay as required�
WARNING
MAKE CERTAIN THAT THE AC CORD TO THE LIFT MOTOR
CONTROLLER IS UNPLUGGED BEFORE CONNECTING LIFT
MOTOR CABLES TO MOTORS
Motor assembly
in work surface
stiffener - before
back panel
attachment
Motor assembly
in work surface
stiffener - before
back panel
attachment
Connect #2
motor cable
Connect #1
motor cable
SECTION III - Assembling the corner
and linear bench
Motor receptacle
Motor cable
connector
When connecting
motor cable to motor
an audible ”click”
will be heard
Connect #3
motor cable
Connect #4
motor cable
