SIT-TO-STAND TECHBENCH INSTALLATION MANUAL
Eaton.com/techbench
Sit-to-Stand Techbench
Installation Manual
2
Table of contents -
I. GENERAL INFORMATION
About this guide � � � � � � � � � � � � � � � � � � � � � � � � � � � �
2
Contact information � � � � � � � � � � � � � � � � � � � � � � � � � �
2
Before you begin � � � � � � � � � � � � � � � � � � � � � � � � � � � �
3
Safety warnings and precautions � � � � � � � � � � � � �
3-4
Bench capacity � � � � � � � � � � � � � � � � � � � � � � � � � � � � �
4
Environment � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �
4
II. PREPARING TO ASSEMBLE THE CORNER AND
LINEAR BENCH
The bench components � � � � � � � � � � � � � � � � � � �
5-10
Tools required � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �
5
Personal protective equipment recommended � � � � �
5
Sit-to-stand linear techbench components � � � � � � � �
5
Assembly hardware � � � � � � � � � � � � � � � � � � � � � � � � � �
6
III. ASSEMBLE THE CORNER AND LINEAR BENCH
A� Wiring the bench - AC Cord � � � � � � � � � � � � � � � � �
7
B� Wiring the bench - Control Pad � � � � � � � � � � � � � � �
8
C� Wiring the bench - Motor Cables � � � � � � � � � � � � �
9
D� Wiring the leg assembly � � � � � � � � � � � � � � � � � � �
10
E� Leg assembly and Back Panel � � � � � � � � � � � � � � �
11
F� Leg assembly � � � � � � � � � � � � � � � � � � � � � � � � � � � �
12
G� Initialize the lift motor system � � � � � � � � � � � � � �
13
IV. SETTING UP AND USING THE CORNER AND
LINEAR BENCH
A� Adjusting the levelers � � � � � � � � � � � � � � � � � � � � �
14
B� Operating the height adjustable worksurface � � �
14
V. CORNER AND LINEAR BENCH ACCESSORIES
A� Full shelf installation � � � � � � � � � � � � � � � � � � � � � �
15
B� Half shelf installation � � � � � � � � � � � � � � � � � � � � � �
16
C� Caster and foot rest installation � � � � � � � � � � � � �
17
D� Cable chain installation � � � � � � � � � � � � � � � � � � � �
18
E� Flextray � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �
19
F� Ganging plate � � � � � � � � � � � � � � � � � � � � � � � � � � � �
20
VI. USER MAINTENANCE INSTRUCTIONS
Care and cleaning � � � � � � � � � � � � � � � � � � � � � � � � � �
21
About this guide
This document is intended to help provide direction on the
unpacking and basic assembly of Eaton’s Sit-to-Stand Tech
Bench System and it’s configurable accessories�
Intended audience
This document is intended for personnel experienced at
installing bench equipment in a control center facility�
Technical support
If you encounter any problems with this installation,
send an email and detailed description of the problem,
as well as contact information, to Technical Support at:
ToSupportESWorcesterMA@eaton�com
Document history
The following table shows this document’s revision history:
September, 2019 First Publication – Pub No� IB210001EN
October, 2019
Second Publication – Pub No� IB212001EN
Sales representative and contact information
Contact your Eaton Sales representative using one of the
methods below:
Phone
Call us toll free at 800-225-7348 (US Only)
or 508-852-4300
Eaton
160 Gold Star Boulevard
Worcester, MA 01606
InfoESWorcesterMA@Eaton�com
Web
Visit us at Eaton�com/techbench and click on
“Contact Us�” Simply complete and submit the
form as directed on our website�
SECTION I
DISCLAIMER OF WARRANTIES AND LIMITATION OF LIABILITY
The information, recommendations, descriptions and safety notations in this document are based on Eaton Corporation’s
(“Eaton”) experience and judgment and may not cover all contingencies� If further information is required, an Eaton sales
office should be consulted� Sale of the product shown in this literature is subject to the terms and conditions outlined in
appropriate Eaton selling policies or other contractual agreement between Eaton and the purchaser�
THERE ARE NO UNDERSTANDINGS, AGREEMENTS, WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WARRANTIES
OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY, OTHER THAN THOSE SPECIFICALLY SET OUT IN ANY
EXISTING CONTRACT BETWEEN THE PARTIES� ANY SUCH CONTRACT STATES THE ENTIRE OBLIGATION OF EATON� THE
CONTENTS OF THIS DOCUMENT SHALL NOT BECOME PART OF OR MODIFY ANY CONTRACT BETWEEN THE PARTIES�
In no event will Eaton be responsible to the purchaser or user in contract, in tort (including negligence), strict liability or other-
wise for any special, indirect, incidental or consequential damage or loss whatsoever, including but not limited to damage or
loss of use of equipment, plant or power system, cost of capital, loss of power, additional expenses in the use of existing
power facilities, or claims against the purchaser or user by its customers resulting from the use of the information, recom-
mendations and descriptions contained herein� The information contained in this manual is subject to change without notice�
