19
SIT-TO-STAND TECHBENCH INSTALLATION MANUAL
Eaton.com/techbench
Sit-to-Stand Techbench
Installation Manual
SECTION V - Corner and linear accessories
E. Flextray installation
•
The flextray lengths vary along with the number of flextray
brackets�
•
To assemble the flextray, mount the flextray brackets to the
back panel first�
•
Assemble the flextray bracket to back panel with (2)
3
/
8
x 1-
1
/
4
"
lg hex head self-tap screws� The number of brackets that are
used vary on the length of the bench
•
Place flextray on flextray brackets� Center flextray along
length of work surface�
•
Slide flextray under crimping tabs of flextray bracket & crimp
tabs around flex try�
•
Place flextray retainer to top of flextray and align with square
hole in flextray bracket�
•
Assemble flextray retainer using (1) 1/4-20 carriage bolt and (1)
1/4-20 kepnut�
•
Each flextray bracket requires one flextray retainer assembly�
R x 1 per assy.
S x 1 per assy.
Q x 2 per assy.
Hardware
required
3
/
8
" hex head
self-tap screw
Flextray
bracket
Flextray
Back panel
1
/
4
-20 carriage
bolt
1
/
4
-20 kepnut
Crimping tab
on flextray
bracket
Flextray
retainer
Back panel
mounting
holes
