15
Installation
EATON ICUBE 2.0
UM.ICUBE2.0.SG.0822 August 2022 www.eaton.com
Network cables are as follows:
Figure 3 .8
3.2.3.2 Group control
Connect the network cable (PlAN identifier) left on the top of air conditioner cabinet 1 to the PlAN port at the rear
of cooling unit 2 in the following figure: 3.9 & 3.10.
Connect the network cable left on the top of air conditioner cabinet 2 to the PLAN port at the rear of cooling unit
3 in the following figure: 3.9 & 3.10.
Figure 3 .9
Wiring diagram for group control communication
Group control communication wires are as follows:
Figure 3 .10
