![background image](http://html1.mh-extra.com/html/eaton/eafr-110plv/eafr-110plv_instruction-booklet_3907465002.webp)
2
Instruction Booklet
IB0191004EN
Effective June 2020
EAFR-110PLV current and arc light
sensor relay user manual
EATON
www.eaton.com
1. Introduction
Read these instructions carefully and inspect the equipment to
become familiar with it before trying to install, operate, service, or
maintain it.
Electrical equipment should be installed, operated, serviced, and
maintained only by qualified personnel. Local safety regulations
should be followed. No responsibility is assumed by Eaton for any
consequences arising out of the use of this material.
We reserve right to changes without further notice.
1.1 Abbreviations
CB
– Circuit breaker
CBFP
– Circuit breaker failure protection
EMC
– Electromagnetic compatibility
EPROM – Erasable programmable read only memory
HW
– Hardware
LED
– Light emitting diode
LV
– Low voltage
ms
– Millisecond
MT
- Master trip
MV
– Medium voltage
NC
– Normally closed
NO
– Normally open
SF
– System failure
SW
– Software
uP
– Microprocessor
2. General
The Eaton Arc Flash Relay (EAFR)-110PLV is a sophisticated micro-
processor based arc flash protection relay with combined current
and arc sensing. Combined current and arc sensing provides an
integrated dual trip criteria. It is designed to minimize the damage
caused by an arcing fault (arc flash) by tripping the circuit breaker
sourcing the fault current, and optionally, an Arc Quenching Device.
The EAFR-110PLV complete system self-supervision function
provides the highest level of dependability by continuously monitor-
ing all internal system functions along with external connections.
The EAFR-110PLV is designed according to the latest protection relay
standards and is therefore suitable for installations in any environ-
ment, such as utility, traditional or renewable power plants, off
shore, marine, oil and gas, mining, steel, or any other heavy industry
applications, as well as commercial and institutional electrical
systems. The EAFR-110PLV is suitable for either medium voltage or
low voltage switchgear and motor control center applications in both
new and retrofit installations.