100
3. Disassembly and Assembly
01/2018 Rev. 1
EA(B)O-6X06
20. From the front side of the transmission, install the three
retaining capscrews of the shift rails’ front support. Use
an 11mm hex socket.
NOTE: Apply Dow Corning 780 sealant onto the
capscrew contact surfaces. Tighten capscrews to
the torque of 19-26 N.m (14-19 Lb.ft)
6934
6988
21. Install the two pivot pins of the 5th/6th shift yoke (one
at each side of the case). Use a 13mm hex socket.
NOTE: Apply Dow Corning 780 sealant onto the
threads and contact face of the pins. Tighten to the
torque of 19-26 N.m (14-19 Lb.ft).
6989
22. Using a pry bar, shift into the 2nd speed by pushing the
1st/2nd gear synchronizer sleeve downward.
6981
Transmission Assembly
