159
EA(B)O-6X06
01/2018 Rev. 1
4. Electro-Hydraulic Control Unit
Electro-Hydraulic Control Unit
Disassembly and Assembly
0120-18
0121-18
Recirculation Hose Replacement
Disassembly
1. To remove the recirculation, first remove the oil reservoir
(see
Reservoir Replacement
), positioning a container to
prevent oil from dripping from the engine compartment.
2. Then remove the hose together with the clamps.
Assembly
1. Mount the new repair kit and, with the aid of a specific
pliers crave new clamps.
2. Mount the reservoir (see
Reservoir Replacement
).
Clutch Actuator Tube Replacement
Disassembly
1. Loosen the tube connection with a fixed wrench and cut
the plastic clamp, removing the entire tube.
NOTE: Before replacing the actuator tube, seal
the reservoir cap to prevent from oil splashes (see
Preparation Before Disassembly
, operations 3 and
4).
