![background image](http://html1.mh-extra.com/html/east-tester/et3501/et3501_operating-instructions-manual_3444802067.webp)
ET35 Series Digital Bridges(LCR)Operating Instructions
Hangzhou Zhongchuang Electron Co., Ltd.
64
4.2.5 Configuring LAN IP address
To achieve the communication of ET35 through LAN, an IP address must be
configured and LAN cable connected.
The IP address can be automatically obtained or manually configured.
Method of obtaining IP address
Method
Description
DHCP
Available IP address can be automatically obtained through DHCP
server
IP address
IP address, subnet mask and gateway can be manually configured
After the IP address is automatically obtained, refresh the interface, and check the
following areas inn the system configuration page to view the address, subnet mask and
gateway:
IP address
Subnet Mask
Gateway
IP address depends on the following conditions
DHCP
Assigned IP address
On
Assigning DHCP address
Off
Assigning the IP address manually configured
The steps of obtaining an IP address automatically:
1. Press [System].
2. Press the [System Config] function key.
3. To get an IP address through DHCP, you can use the arrow key to select "DHCP",
and press the [Enter] key.
4. Press the [On] function key.
The page is shown below
Содержание ET3501
Страница 25: ...ET35 Series Digital Bridges LCR Operating Instructions Hangzhou Zhongchuang Electron Co Ltd 22...
Страница 77: ...ET35 Series Digital Bridges LCR Operating Instructions Hangzhou Zhongchuang Electron Co Ltd 74...
Страница 93: ...ET35 Series Digital Bridges LCR Operating Instructions Hangzhou Zhongchuang Electron Co Ltd 90...