ET35 Series Digital Bridges(LCR)Operating Instructions
Hangzhou Zhongchuang Electron Co., Ltd.
61
4.2.3 Turn on/off buzzer function
ET35 has the voice prompt function and will issue voice prompt in the event of one or
more of the following situations:
display wrong message or warning message
the open / short circuit correction has been done for the instrument
the open / short circuit / load correction has been done at the designated point
by the user for the instrument
the limit test for the DUT fails, or the comparator has been classified by the
DUT into OUT OF BIN / AUX BIN
DUT passes the limit test, or the comparator has been classified by the DUT
into any one from BIN1 to BIN8
enable/disable key locked
The steps of setting the voice prompt function
1. Press the [System] key
2. Press the [System Config] function key
3. Use the arrow key to select “Buzzer”, and press the [Enter] key
4. Press the corresponding function key to activate or deactivate voice prompt
The page is shown below
Содержание ET3501
Страница 25: ...ET35 Series Digital Bridges LCR Operating Instructions Hangzhou Zhongchuang Electron Co Ltd 22...
Страница 77: ...ET35 Series Digital Bridges LCR Operating Instructions Hangzhou Zhongchuang Electron Co Ltd 74...
Страница 93: ...ET35 Series Digital Bridges LCR Operating Instructions Hangzhou Zhongchuang Electron Co Ltd 90...