East Tester ET3501, Руководство по эксплуатации

Страница: 18 / 111

ET35 Series Digital Bridges（LCR）Operating Instructions
Hangzhou Zhongchuang Electron Co., Ltd. 15
The page is shown below
3.1.2 Measurement Speed
The measurement speed of ET35 mainly depends on the following factors:

integration time (A / D conversion)

average number

measurement delay

measurement display time
ET35 has four different measurement speeds: slow, medium, fast and customized.
The faster the speed is, the lower the accuracy is; conversely, the slower the speed is, the
higher the accuracy is.
The measurement speed can be set in the pages of component measurement and
measurement setup.
The steps of setting measurement time
1. Press the [Meas Setup] key.
2. Use the arrow key to select "Speed" and press the [Enter] key.
3. Press the corresponding function key to select the desired measurement time. If
“Customized” is selected, then enter the proper number to set up the measurement time.
4. You can use the function key to enter the unit (us, ms, and s), press the [Enter] key
to select the default unit s.
Function keys:
FAST (Fast)
MED (medium speed)
SLOW (Slow)
Customized (user-set time)