ET35 Series Digital Bridges(LCR)Operating Instructions
Hangzhou Zhongchuang Electron Co., Ltd.
48
Function keys:
DELTA switches the comparator to the tolerance mode based on absolute parameter
values
DELTA% switches the comparator to the tolerance mode based on percentage of
tolerance deviations
Seq switches the comparator to the sequential mode
The page is shown below
3.3.3. Nominal value of the tolerance mode
When the tolerance mode is used as the limit mode of the main parameter, the user
must configure the nominal value.
Even if the limit mode of the main parameter is in sequential mode, the user may
configure a nominal value, but it does not affect the classification.
The steps of setting the nominal value:
1. Press the [Meas Setup] key.
2. Press the [Limit Setup] function key.
3. Use the arrow key to select the "nominal value", and press the [Enter] key.
4. Use the numeric key to enter a value, and the function key will change to the unit.
The page is shown below
Содержание ET3501
Страница 25: ...ET35 Series Digital Bridges LCR Operating Instructions Hangzhou Zhongchuang Electron Co Ltd 22...
Страница 77: ...ET35 Series Digital Bridges LCR Operating Instructions Hangzhou Zhongchuang Electron Co Ltd 74...
Страница 93: ...ET35 Series Digital Bridges LCR Operating Instructions Hangzhou Zhongchuang Electron Co Ltd 90...