East Tester ET3501, Руководство по эксплуатации

Страница: 82 / 111

ET35 Series Digital Bridges（LCR）Operating Instructions
Hangzhou Zhongchuang Electron Co., Ltd. 79
Users can save up to 81,920 groups of measurement results at one time.
Before saving the measurement results to a USB memory, the user needs to do some
preparation work to start the measurement, so that the data buffer contains the required
data.
Format of measurement results
Data A and Data B in the measurement result file vary depending on whether the
“valid digit” setting is on.
Comp
arator
Format of result
Off <Data A>, <Data B>, <Status>
On <Data A>, <Data B>, <Status>, <BIN No.>
<Data A> and <Data B> adopt the scientific notation with the precision of
six digits after the decimal point
Status uses one of the following status values to represent the state of the
measurement results:
0 Measurement completed successfully.
+1 Overload.
+3 Signal beyond the permitted limit of the signal source detected.
+4 Automatic level control functions fail.
0 OUT_OF_BINS
+1
～
+9 BIN 1
～
BIN 9
+10 AUX_BIN
BIN No
（
IN/OUT
）
respresents the bin classification result in the measurement as
shown below:
0 OUT_OF_BINS
+1
～
+9 BIN 1
～
BIN 9
+10 AUX_BIN
The steps of saving the measurement results on the USB memory:
1. Insert the USB memory into the front USB port.
2. Press the [Save] key.
3. Press the [Save Data] function key.
4. Press the [Start recording] function key to enter the result into the data buffer
memory.
5. Start measurement.
6. Press the [Save and stop] function key to stop the recording and save the results to
a USB memory.
7. Prompt success.