Dynapac PL2000S, Руководство по эксплуатации

Страница: 96 / 228

D 36
D PL2
000.
G
B
36
-168
-
1
0
.0
1
Basic settings on the display
Setup menu
The Setup menu is called up by pressing the Stop, Start and Enter keys together. The
left and right arrow keys can be used for scrolling through the pages in the display’s
Setup screens
The Setup menu can only be quit in Setup screen 3 by pressing the Enter key. The
modified values are then accepted.
The following variables can be set:
- Contrast
- Light
- Dimmer
- Timer
- Beep
Setup screen 1
Setup screen 1 is used for
adjusting Contrast,
Light, Dimmer and Timer on
the display.
- Contrast: Contrast (0...255)
can be altered using the
appropriate keys until opti-
mum contrast has been
achieved.
- Light: The Light variable
sets the background light-
ing level.
Value range 0-99% can be
set using the appropriate function keys
- Dimmer: The Dimmer variable can be used to automatically dim the background
lighting, thereby extending the service life of the fluorescent tubes. Dimming is ac-
tivated at the touch of a button after a Timer variable has expired. When a key is
pressed again, the background lighting is returned to the set value (Variable Light).
If no dimming is wished for or permissible, set Dimmer variable to 100 %. Settings
are altered using the appropriate function keys.
- Timer: The Timer variable activates the display dimmer (0...255 s) after the last
keystroke. This is set using the appropriate function keys.
Any changes made are only adopted once the reset button has been pressed.
Terminal2.Tif/Lightmask.bmp