Dynapac PL2000S, Руководство по эксплуатации

Страница: 179 / 228

D 119
D PL2
000.
G
B
1
1
9
-168
-
10
.0
1
Item. Designation Brief description
5 Cable lamp
The cable lamp is a special function with
Sonic-Ski (
&
).
Two operating modes are available:
-
Lamp on: cable mode active. The cable mode
has been activated from manual mode by
simultaneously pressing the UP and DOWN
buttons.
- Lamp off: ground mode active (create mean
value).
During ground sensing, the Sonic-Ski is fitted
in a longitudinal direction, during cable sens-
ing, the Sonic-Ski is fitted in a transverse di-
rection.
6 UP button
To increase the nominal value. The machine
responds in automatic or manual mode (change to
actual value).
Machine does not respond in semi-automatic mode
(only for pre-selections, i.e. nominal value specifica-
tions.)
7 DOWN button
To decrease the nominal value. Machine response in
automatic or manual mode (change to actual value).
Machine does not respond in semi-automatic mode
(only for pre-selections, i.e. nominal value specifica-
tions.)
8
Automatic/manual
button To changeover between automatic and manual mode
(hand-controlled operation)
9 Input button
When this button is pressed, calibration to zero is
conducted and/or the nominal value is set to match
the actual value
10 LED display
Enlarged and detailed depiction of functions of the
arrow symbols on the LC display.
The LED is particularly useful when the operator is at
a great distance from the controller and if the sun is
strong.
11 Connection cable
For connection with the connection box. (Connection
to vehicle circuit voltage)