Dynapac PL2000S, Руководство по эксплуатации

Страница: 142 / 228

D 82
D PL2
000.
G
B
82
-168
-
1
0
.0
1
Pos. Designation Short description
6
Raising front right
side of machine
While the button is being pressed, the front right trac-
tion unit is extended continuously until it reaches its
limit position.
When this function is active, levelling is disen-
gaged automatically on the right side.
7
Lowering front
right side of
machine
While the button is being pressed, the front right trac-
tion unit is retracted continuously until it reaches its
limit position.
When this function is active, levelling is disen-
gaged automatically on the right side.
8
Raising rear of
vehicle
While the button is being pressed, the rear traction
units are extended continuously until they reach their
limit position.
9
Lowering rear of
vehicle
While the button is being pressed, the rear traction
units are retracted continuously until they reach their
limit position.
10
Raising the side
board
While the button is being pressed, the side board (on
the side on which the control panel is fitted) is raised
continuously until it reaches its limited position.
When the button is released, the side board auto-
matically lowers back down to the lower limit posi-
tion.
Each control element only controls the func-
tion on the same side of the vehicle as itself.
While the button is being pressed, the auto-
matic leveller is set to "Standby".
With milling drum housing open:
-
1. Press button: side board is raised.
- 2. Press button: side board is lowered.
Danger resulting from raised loads. Do not en-
ter the danger area.
If the engine is switched off, the side board
slumps.
If the milling drum housing is closed, the side
board is lowered automatically.