Dynapac PL2000S, Руководство по эксплуатации

Страница: 163 / 228

D 103
D PL2
000.
G
B
10
3-
16
8 -
10.
0
1
Grading depth display
One grading depth display, indicating
cm and/or inches, is located on both
sides of the milling housing. This pro-
vides additional visual assistance in ad-
dition to the levelling equipment.
- The upper edge of the side shield
serves as a reference and indicates
the depth of the engaged milling drum
on the display (1).
Milling drum operational check
Several control marks can be found on
both side shields and, depending on the
grating depth, indicate the extent to
which the milling drum is engaged.
The control marks are used as assis-
tance, e.g. if milling is to be conducted
as close as possible to an obstacle (e.g.
drain cover).
- Control marks are available for the fol-
lowing grading depths: 4 cm (1), 10 cm
(2), 20 cm (3), 30 cm (4).
- The slots in the side shield under the
marks are used as a reference line
and indicate the minimum possible distance between the milling drum and obstacle
at which no damage will be caused.
08Anze~1.tif
1
08Anze~1.tif
1
4
2
3