Dynapac PL2000S, Руководство по эксплуатации

Страница: 9 / 228

A 1
A PL
2000.
G
B
1-
2
-
10.
01
A Intended usage
The Dynapac "Guideline for the intended and correct usage of cold planers" falls with-
in the scope of supply of this machine. It forms part of these Operating Instructions
and must be observed. National regulations apply without restriction.
The machine described in these Operating Instructions is a cold planer which can be
used as follows in enclosed building sites on roads:
- to partially or completely remove asphalt, asphalt based and cement layers
- to remove distortions in the form of track grooves, lateral bulges, lateral warps,
- to recreate a proper surface,
- to implement roughing up and stripping work.
For this, the underlying base layer must be robust enough to withstand movement of
the cold planer.
The transportation of outsiders is expressly forbidden, as is using the cold planer as
a traction mechanism, winch or lifting device.
The intended usage also includes compliance with the operating, transport, mainte-
nance and repair conditions specified in the Operating Instructions.
The machine is not designed for any type of usage not described in the intended us-
age section. The manufacturer is not liable for such instances of use. The operator
alone bears all risks for such usage. When in doubt, contact the manufacturer.
Obligations of the operator: An operator, as defined in these Operating Instruc-
tions, is any natural or judicial person who uses the cold planer himself or on whose
behalf it is used. In special circumstances (e.g. leasing, rental), the operator is that
person who is to observe the specified operating obligations in accordance with the
contractual agreements made between the owner and user of the cold planer.
The operator must ensure that the cold planer is only used for its intended purpose
and that all kinds of risk to the life, limb and health of users or third parties are pre-
vented. Compliance must also be maintained with the accident prevention regula-
tions, all technical safety rules as well as the operating, maintenance and repair
guidelines. The operator must ensure that all users have read and understood these
Operating Instructions.