Dynapac PL2000S, Руководство по эксплуатации

Страница: 87 / 228

D 27
D PL2
000.
G
B
27
-168
-
1
0
.0
1
Pos. Designation Short description
36
Milling drum
ON / OFF
Two switch positions can be selected :
-
0 : milling drum drive OFF
- 1 : milling drum drive ON
At the touch of a button the milling drum drive is
switched on or off.
The engaged function is confirmed by LED.
$
The milling drum drive can only be engaged at
idle speed.
The milling drum drive cannot be engaged if
the drum flap is open (limit switch), or is disen-
gaged automatically if this is open.
The milling drum drive is disengaged automat-
ically during transport or reverse travel and
when raising the machine.
37
Water pump
ON / OFF
Three switch positions can be selected :
-
0 : Water pump OFF
- AUTO : Water sprinkling is linked to the control
lever. The water pump only pumps when the
milling process starts.
The adjustable overrun period is used to end
pumping automatically when the milling work is
interrupted or completed.
Sprinkling is metered in accordance with the rate
of machine feed.
- 1 : Continuous sprinkling
At the touch of a button, the system switches
between functions 0 and 1. When the button is
pressed down for an extended period, the AU-
TO function is activated.
The engaged function is confirmed by LED.
This water is definitely not drinking quality!
The button can also be used to operate the
high-pressure cleaner. The pump must be
switched over for work with the high-pressure
cleaner on its high-pressure setting. This is
done at the lower front control panel.