Dynapac PL2000S, Руководство по эксплуатации

Страница: 159 / 228

D 99
D PL2
000.
G
B
99
-168
-
1
0
.0
1
High pressure cleaner
The hose package (1) of the high pres-
sure cleaner can be found on the under-
side of the vehicle frame at the rear of
the machine.
The spray pistol (2) is locked in its detent
by a cotter pin (3).
- Remove cotter pin.
- Remove spray pistol from bracket.
- Pull hose out of fixture until you hear a
click.
When released, the hose automatical-
ly engages here.
- The hose will automatically roll back
up again if pulled and released again.
- The high-pressure jet is started by pressing the trigger (4).
(Only if the high pressure cleaner function is activated)
When cleaning heavily contaminated areas, note that particles of dirt may be flung in
all directions. Danger of accidents.
$
When cleaning, never direct water jet of high-pressure cleaner towards
electrical components such as sensors, connection boxes, operating
panels, electric distributors etc.
!
Hochdruck.tif
1
2
3
4