Dynapac PL2000S, Руководство по эксплуатации

Страница: 165 / 228

D 105
D PL2
000.
G
B
10
5-
16
8 -
10.
0
1
Interlock on scraper flap
One interlock for the scraper flap can be
found on either side on the back of the
drum box.
The interlock must be released before
the scraper flap can be opened.
When interlocked, the bolt (1) is in the
detent bore (2).
Unlocking procedure:
- Use handle (3) to rotate interlock bolt
upwards and slide towards the centre
of the vehicle, via the sliding interlock
(4).
- Rotate the bolt downwards so that the handle lies on the inner side of the sliding
interlock (4).
Retaining hook of scraper flap
The retaining hook for the scraper flap
can be found on the right-hand side of
the machine.
When the scraper flap is opened, this
automatically engages in the retaining
hook.
The limit switch is also activated
Only open the scraper flap once the mill-
ing drum drive and the travel drive have
been switched off.
Refer to limit switch of scraper flap
Unlocking procedure:
- Use the appropriate controls to open the scraper flap so wide that the retaining
hook is disengaged.
- Swivel retaining hook upwards on collar (1) and grip.
- Use appropriate controls to close the scraper flap completely.
09walz~1.tif
3
1
2
4
422bel~1.tif
1