Dynamica HALO RB-10 Скачать руководство пользователя страница 8

Страница: 8 / 86

IMPORTANT-

•

Reorient the instrument.

•

Increase separation between the instrument and possible

sources of electromagnetic wave interference.

•

Increase separation between the power cable of the instrument

and possible sources of electromagnetic wave interference.

•

Connect the instrument to an outlet on a circuit different from that

to which possible sources of electromagnetic wave interference
are connected.

•

Confirm that any other device connected with the instrument is

not affected by electromagnetic wave interference.

Warranty on Product

The Model HALO RB-10 Spectrophotometer is warranted to operate
according to the specifications given in the instruction manual,
provided it is used in accordance with the instructions described in
the manual.

(1) Scope of Warranty

(a) Any parts which prove to be defective in design or

workmanship during the warranty period will be repaired
without charge.

(b) A substitute part may be used for repair, or replacement

with an equivalent product may be made instead of repair.

printer to be updated frequently for improvement may not
be available in original versions at the time of replacement.

(2) Warranty

Period

One year from the date of initial installation.
Consumables such as WI and D

lamps are excluded from

warranty.

(3) Availability of Technical Support Service

Technical support service for this instrument is available within
regular working hours on workdays predetermined by us.

Содержание HALO RB-10























































































Результаты поиска

Содержание HALO RB-10

Отзывы:

Dynamica HALO RB-10, Инструкция по эксплуатации, Страница: 8 / 86

Результаты поиска

Содержание HALO RB-10

Отзывы: