Dynamica HALO RB-10 Скачать руководство пользователя страница 44

Страница: 44 / 86

3-11

Step by Step Operation

1. RATIO parameter Setup

To select the function displayed on the menu,

a. Press the number to setup the parameters. For example, press 2 to define

the Wavelength used in the ratio.

b. To return to the previous menu, press Clear Return

c. Press 0 to end setting the parameter.

2. Definition of the Display

WL1 or WL2 define the wavelengths that will be used in the ratio analysis. A

maximum of 3 can be used, if using the background. If not using the backgr

ound, only 2 wavelengths can be used.

NOTE: WL3 will be used as the background if 3 wavelengths are selected

Press 1 to enter the use background option. The <On> or <Off> option will
appear in the Select function bar, press 1 or 2 to select On or Off.

Press 2 or 3 to change the wavelength use for the ratio test. The wavelength
range limit is from to 190.0 ~ 1100.0 nm. The wavelength will be highlighted,

0.001

Use Background

WL1(nm)

450.0

WL2(nm)

350.0

WL3(nm)

500.0

End Setting

Select Function
Sel: _

RATIO

500.0

Содержание HALO RB-10























































































Результаты поиска

Содержание HALO RB-10

Отзывы:

Dynamica HALO RB-10, Инструкция по эксплуатации, Страница: 44 / 86

Результаты поиска

Содержание HALO RB-10

Отзывы: