manualshive.com logo in svg

Dynamica HALO RB-10, Инструкция по эксплуатации, Страница: 11 / 86

Поделиться
Скачать
Dynamica HALO RB-10 Скачать руководство пользователя страница 11

 IMPORTANT-

5 

 

Disposal this instrument 
 

When you discard equipment, please check and discard a related 
statute etc. or ask the service section of Dynamica. 

 
 
Other Precautions 
 
1.  Handling of Chemicals and Samples 

 
(1)  The user is responsible for following relevant legal standards 

and regulations in handling, storage and discarding of 
chemicals and samples used in analytical operations of this 
instrument. 

 
(2)  Reagents, standard solutions and accuracy-control samples 

shall be handled, stored and discarded as instructed by the 
respective suppliers. 

 

2.  Notice on Instruction Manuals 

 
(1)  Information contained in the instruction manuals furnished with 

the instrument is subjected to change without notice for product 
improvement. 

 
(2)  This manual is copyrighted by Dynamica with all rights 

reserved. 

 
(3)  No part of this manual may be reproduced or transmitted in any 

form or by any means without our express written permission.  

 

3.  Trademark Acknowledgments 

 
Microsoft, Windows, Microsoft Excel, Microsoft Word and Windows 
XP are registered trademarks, trademarks or trade names of 
Microsoft Corporation, USA, while other company names and 
product names are those of respective companies. 

 
 
 
 
 
 
 
 

   

Содержание HALO RB-10























































































Отзывы:

Нет отзывов