Dynamica HALO RB-10 Скачать руководство пользователя страница 12

Страница: 12 / 86

SAFETY-

PRECAUTIONS ON SAFETY

Before using the Model HALO RB-10 Spectrophotometer, be sure to
read the following safety instructions carefully.

GENERAL SAFETY GUIDELINES

•

Follow all the operating procedures provided in this manual.

•

Installation and maintenance of the product shall be carried out by

service personnel qualified therefor.

•

Be sure to observe the warnings indicated on the product and in

the instruction manual. Failure to do so could result in personal
injury or damage to the product.

•

The hazard warnings which appear on the warning labels on the

product or in the manual have one of the following alert headings
consisting of an alert symbol and signal word DANGER,
WARNING, or CAUTION.

DANGER

: Indicates an imminently hazardous situation

which, if not avoided, will result in death or
serious injury.
(This warning does not apply to this product.)

WARNING

: Indicates a potentially hazardous situation

which, if not avoided, can result in death or
serious injury.

CAUTION

: Indicates a hazardous situation which, if not
avoided, will or can result in minor or
moderate injury, or serious damage to the
product.

: Precedes every signal word for hazard

warnings, and appears in safety-related
descriptions in the manual.

SAFETY SUMMARY

Содержание HALO RB-10























































































Результаты поиска

Содержание HALO RB-10

Отзывы:

Dynamica HALO RB-10, Инструкция по эксплуатации, Страница: 12 / 86

Результаты поиска

Содержание HALO RB-10

Отзывы: