3-21
3.4 Wavelength Scan
This section describes how to perform a scan spectrum using Wavelength
Scan.
3.4.1 Wavelength Scan Mode
Select wavelength scan from the Main Menu.
Press 2 on the keyboard to enter the Wavelength Scan sub menu
1) Wavelength Scan Sub menu
3.4.2 Step by Step Operation
Wavelength Scan Test Setup
To select the function displayed on the menu, the operator can use
a. The numeric key as the function key, just press the number, such as 1
to set the wavelength for a scan. The HALO RB-10 will automatically
enter the submenu after pressing the numeric key.
b. To return to the previous menu, press Clear Return
c. Press 0 to end setting the parameter.
nm
-0.001
A
Wavelength Scan
1
Start WL(nm)
900
2
Stop WL(nm)
800
3
Data Mode
ABS
4
Upper Limit
3.000
5
Lower Limit
-3.000
6
Speed (nm/min)
400
0
End Setting
Select Function:_
Sel:_
500.0