3-36
Print Set up
Press 1 on the keyboard to select the required printer. The HALO RB-10 supports
printers that uses the following printing protocols; ESC/P; DPU or PCL/3. A typical
supplier for ESC/P is EPSON, for DPU is SEIKO, for PCL/3 is HP. Consult your
distributor to obtain the latest list of compatible printers. Press [1], [2] or [3] on the
keyboard to select the printer you want to connect to the HALO RB-10.
Press 2 to select <Auto print> function. If the autoprint function is on, the HALO
RB-10 will print the content following the parameter set in the print set menu. But if
the autoprint function is off, the print content will depend on the display menu.
For example, if the display is the peak list, the system only needs to print the peak
list although the peak list maybe turned off in the parameter set menu. When the
function is not in the following modes (SPECTRUM, PEAK, VALLEY, ALL DATA,
WORKING CURVE, STD DATA, SAMPLE DATA), the HALO RB-10 will only print
the current data for WL position and photometry.
Press 3, 4 or 5 and the print set submenu will be appear on the screen as shown
like below.
nm
-0.001
A
Photometry
1
Working Graph
ON/OFF
2
STD Data
ON/OFF
3
Sample Data
ON/OFF
Select Function
Sel:_
500.0