DURKOPP ADLER 610-10, Руководство по эксплуатации

Страница: 80 / 148

Settings via software
Operating Instructions 610-10/630-10 - 01.0 - 01/2021 78
Mode
PROGRAMMING
Other sewing step parameters
A tap on the Other sewing step parameters button will bring up
an overview of all available parameters.
Abb. 46: Other sewing step parameters
Parameter Meaning Value range
Stitch Condensing at Start Stitch condensing at seam
beginning
on (= 1) or off (= 0)
0 – 1
Stitch Condensing at End Stitch condensing at seam
end
on (= 1) or off (= 0) 0 – 1
Thread Trimmer Thread trimmer
on (= 1) or off (= 0) 0 – 1
Adjust Bottom Fullness
in %
Fullness correction
parameter bottom (%) -50 – 50
Seam Graphic Seam pattern:
1 = Pre-ruffle sleeve
2 = Tape front
3 = Tape back 1 – 3
Grading Factor Grading factor
(% per size) 0.0 – 6.0