DURKOPP ADLER 610-10, Руководство по эксплуатации

Страница: 32 / 148

Operation
Operating Instructions 610-10/630-10 - 01.0 - 01/2021 30
Fig. 13: Threading the reinforcement tape (3)
6. Activate threading mode by pressing the two push buttons (9)
on the machine at the same time.

The tape clamp is released, making compressed air avail-
able in the guide piece (10) for the transport of the reinforce-
ment tape.
7. Insert the reinforcement tape through the guide (12).
8. Set the guide (12) approximately to the width of the reinforce-
ment tape used.
9. Insert the reinforcement tape through the tape clamp (11).
10. Insert the reinforcement tape into the guide piece (10) and
allow it to run through until no excess reinforcement tape is
left between the tape clamp (11) and the guide piece (10).
Grab the reinforcement tape, using, for example, a pair of twee-
zers while holding on to the end.
(9) - Push buttons
(10) - Guide piece (11) - Tape clamp
(12) - Guide
⑩
⑪
⑫
⑨