DURKOPP ADLER 610-10, Руководство по эксплуатации

Страница: 98 / 148

Setup
Operating Instructions 610-10/630-10 - 01.0 - 01/2021 96
7.3 Assembling the stand
Fig. 54: Assembling the stand
Fit the stand as follows:
1. Tighten the pedal (1) on the cross strut (2).
2. Tighten the cross strut (2) to the stand using the screw and
the wing nut (3).
3. After the machine has been fully assembled, adjust the pedal
(

p. 101 ).
4. Turn the screw (4) to ensure that the stand is positioned
securely. All 4 feet of the stand must be in contact with the floor.
7.4 Tabletop
Ensure that the tabletop has sufficient load-bearing capacity and
strength. If you want to make your own tabletop, use the dimen-
sions given in the diagram (
Appendix,

p. 137 ) as an example.
(1) - Pedal
(2) - Cross strut (3) - Wing nut
(4) - Screw (cover)
④ ①
② ③