DURKOPP ADLER 610-10, Руководство по эксплуатации

Страница: 124 / 148

Troubleshooting
Operating Instructions 610-10/630-10 - 01.0 - 01/2021 122
2253 Error Excess voltage • Check the mains voltage
2255 Error Y-axis stepper motor
overload (I²T):
• Stepper motor not moving
freely or blocked
• Stepper motor defective
• Controller defective
• Remove the blockage or the
cause of the stiff movement
• Replace the stepper motor
• Replace the controller
2256 Error Y-axis stepper motor:
• Stepper motor not moving
freely
• Stepper motor defective
• Controller defective
• Correct the cause of not moving
freely
• Replace the stepper motor
• Replace the controller
2262 Error Y-axis stepper motor distur-
bance (IDMA auto increment) • Switch the machine off and on
again
2271 Error Watchdog • Switch the machine off and on
again
• Performing a software update
• Contact Customer Service
2272 Error Stepper motor overvoltage:
• Stepper motor card defective • Replace the controller
2273 Error Y-axis stepper motor error • Check the connection
• Test stepper motor phases
(R = 2.8
Ω
, high impedance to
PE)
• Replace the encoder
• Replace the stepper motor
• Replace the controller
2274 Error Software error • Perform reset
• Performing a software update
• Contact Customer Service
2275 Error Magnet wheel search • Check the connection
• Test stepper motor phases
(R = 2.8
Ω
, high impedance to
PE)
• Replace the encoder
• Replace the stepper motor
• Replace the controller
Code Type Possible causes Remedial action