DURKOPP ADLER 610-10, Руководство по эксплуатации

Страница: 75 / 148

Settings via software
Operating Instructions 610-10/630-10 - 01.0 - 01/2021 73
11. Select whether the new sewing program should be mirrored for
the other side of the sewing material (
Mirror programmed
side to other side
), the other side of the sewing material
should be programmed (
Program other side
) or the pro-
gramming should be ended (
Finish
).

The selected function is indicated by an activated control
field.
12. Tap the OK button.

The sewing program is saved. Depending on which function
is selected, different buttons are displayed:
Tapping the Abort button closes the selection window and brings
up the AUTO user interface.
Important
All previously entered data is deleted!
Parameters that can be set
The following table describes the parameters that can be set on
the
PROGRAMMING user interface.
Function Button
Mirror programmed side to other side AUTO
Program other side PROGRAMMING
Finish AUTO
Symbols/buttons Meaning
Input the program name
There is only one display under
PROGRAMMING . A new sewing program
is automatically assigned the next free
program slot.
Select the right or left piece to be sewn