DURKOPP ADLER 610-10, Руководство по эксплуатации

Страница: 130 / 148

Troubleshooting
Operating Instructions 610-10/630-10 - 01.0 - 01/2021 128
2471 Error • Watchdog • Switch the machine off and on
again
• Performing a software update
• Contact Customer Service
2472 Error Stepper motor overvoltage:
• Stepper motor card defective • Replace the controller
2473 Error U-axis stepper motor over cur-
rent error • Check the connection
• Test stepper motor phases
(R = 2.8
Ω
, high impedance to
PE)
• Replace the encoder
• Replace the stepper motor
• Replace the controller
2474 Error Software error • Perform reset
• Performing a software update
• Contact Customer Service
2475 Error Magnet wheel search • Check the connection
• Test stepper motor phases
(R = 2.8
Ω
, high impedance to
PE)
• Replace the encoder
• Replace the stepper motor
• Replace the controller
2477 Error Stepper motor overload (I²T) • Remove the cause of the stiff
movement or blockage
• Replace the stepper motor
• Replace the controller
2478 Error Encoder error • Check the connection of the
encoder cable and replace, if
necessary
• Replace the controller
2479 Error Current sensor:
• Stepper motor card defective
• Controller defective • Replace the controller
Code Type Possible causes Remedial action