Service Manual for Flexible Batch Broiler, CE Version
14
6/19/2014
SM-BR-BR-0007
Conveyor Drive Chain
The Conveyor Drive Chain connects the drive
motor to the Conveyor.
WARNING
DIsCONNECT THE ELECTRICAL
POWER TO THE BROILER AND
FOLLOW LOCKOUT / TAGOUT
PROCEDUREs.
1. Remove Conveyor Drive Motor Cover. Refer
to the COVERS and PANELS section of the
manual.
2. Remove Discharge Access Panel. Refer to the
COVERS and PANELS section of the manual.
3. Disconnect motor wires.
4. Remove four screws securing motor mounting
plate.
5. Raise motor mounting plate to disengage drive
chain from motor sprocket.
6. Disengage chain from conveyor sprocket.
7. Remove chain from broiler by removing the
master link.
8. Reverse procedure to install a new chain.
NOTE:
When installing the new chain, be sure
to engage the chain on the motor sprocket
and conveyor sprocket. Then adjust the
tension on the chain to allow 4.763 mm chain
deflection, as described in the procedure DRIVE
CHAIN DEFLECTION ADJUSTMENT in the
ADJUSTMENT Section, before tightening the
motor mounting plate screws.
Conveyor
Sprocket
Motor
Sprocket
Chain
Drive Chain and sprockets
Conveyor Drive Motor sprocket
The Conveyor Drive Motor Sprocket is attached
to the motor shaft.
WARNING
DIsCONNECT THE ELECTRICAL
POWER TO THE BROILER AND
FOLLOW LOCKOUT / TAGOUT
PROCEDUREs.
1. Remove Conveyor Drive Motor Cover. Refer
to the COVERS and PANELS section of the
manual.
2. Remove Discharge Access Panel. Refer to the
COVERS and PANELS section of the manual.
3. Disconnect the motor wires.
4. Remove the four screws securing motor
mounting plate.
5. Raise motor mounting plate to disengage drive
chain from motor sprocket.
6. Disengage drive chain from motor sprocket.
