Ducati Monster 696 2009, Руководство пользователя

Страница: 191 / 696

A
B
C
D
E
F
G
H
L
M
N
P
section
G 1
7 Monster 696/696+ - M.Y. 2009 - edition 00
Wheels - Suspension - Brakes
Notes
Wheels must be rebalanced after repair, maintenance and overhaul operations.
Overhauling the front wheel axle
Check the wheel axle for straightness.
Roll the axle on a reference surface and measure maximum distortion using a feeler gauge (see Sect. C 1.1, Front wheel).
Maximum permissible distortion: 0.05 mm.
The surfaces of the axle must be free of any cracks, dents, scoring or any signs of damage, however light.
Localised polished areas are permitted.
Overhaul of the front and rear rim
After you have checked the bearings, check the rim as follows.
Visually inspect the rim for cracks, scoring and deformation; change the wheel if damaged.
Insert the axle in the wheel and mount it on two fixed reference blocks.
Using a dial gauge, measure rim runout and out-of-round relative to the wheel axle (see Sect. C 1.1, Front wheel).
If the values measured are not within the tolerance limits, renew the wheel.
Maximum permissible rim runout
1
mm (0.04 inc.).
Maximum permissible rim runout 0.5 mm (0.02 inc.).