Ducati Monster 696 2009, Руководство пользователя

Страница: 657 / 696

A
B
C
D
E
F
G
H
L
M
N
P
section
P 5
67 Monster 696/696+ - M.Y. 2009 - edition 00
Electrical system
Flasher (PASSING)
Check for continuity across the
(Red/Blue and Brown) wires.
Refit the left-hand handlebar switch and tighten the screws (1) to the specified torque (Sect. C 3, Frame torque settings).
Checking the right-hand handlebar switch
To remove the right-hand handlebar switch, undo the retaining screws (1) and disconnect the wiring connector from the electrical
system.
The colours mentioned in the following descriptions refer to the colours of the wires from the switch and not to the colours of
the wires of the main electrical system.
Engine Stop button
Check for continuity between the
(Red/White and Red/Black) wires with a multimeter (see Sect. P 9, “Diagnostic instruments
for information on operation of the multimeter). When the switch is in the RUN position, there should be electrical continuity
between the two wires. When the switch is in the OFF position there should be no electrical continuity between the two wires.
If these conditions are not met, the Engine Stop switch is not working correctly and must be renewed.
1
LY
Br
OFF
PUSH
O Gr
N
Br
L
HI
LO
R
OFF
PUSH
U
DI E PA SS I G
1 2 3 4 5 6 7 8
Br
B
N
O
A
B
DE
Br BW RB
RB
1