Ducati Monster 696 2009, Руководство пользователя

Страница: 641 / 696

A
B
C
D
E
F
G
H
L
M
N
P
section
P 3
51 Monster 696/696+ - M.Y. 2009 - edition 00
Electrical system
Starter motor
Power:
700 W with 12 V power.
Direction of rotation:
counterclockwise viewed from power take-off side.
The starter motor is highly compact and reliable and therefore rarely gives any type of problem. In case of malfunction, ensure
that the starter motor wiring terminal is properly tightened under the nut and shows no sign of corrosion. If the terminal is properly
tightened and free from corrosion, remove the starter motor and test it under no-load conditions (no load applied to the shaft).
Secure the starter motor to a test bench, making sure you do not damage the casing. Use a fully charged 12 V battery for the
test. Use battery-motor connection cables which are no longer than 70 cm and with the same cross-section as the cable on
the motorcycle itself. Connect the negative terminal of the battery to an unpainted area of the starter motor casing and the
positive terminal to its electrical terminal. The shaft of the starter motor should rotate freely and at high speed. Take care not
to short-circuit the two cables connected to the battery.
Removal of the starter motor
Remove the alternator-side crankcase cover (Sect. N 8, Removal of the alternator-side crankcase cover).
If the whole starting gear assembly needs to be renewed, remove the timing gears and the starter motor idler gear
(Sect. N 9.1, Removal of the starter motor idler gear).
Disconnect the starter motor/starter contactor cable (3) (see plates in the chapterRouting of wiring on frame”, Sect. P 1).
Unscrew the retaining screws (1).
3
1
1