Ducati Monster 696 2009, Руководство пользователя

Страница: 400 / 696

A
B
C
D
E
F
G
H
L
M
N
P
section
N 4.1
18 Monster 696/696+ - M.Y. 2009 - edition 00
Engine
Turn the degree wheel (G) counterclockwise until the dial gauge (C) on the exhaust side shows a lift of 1 mm. Check that the
angular displacement reading on the degree wheel (G) is as specified (Sect. C 1.1, Timing system/valves).
Continue to rotate in the same direction until you obtain a 1 mm lift on the intake side. Check the angular value on the degree
wheel.
Continue to rotate until, in correspondence with the closure of the valve for the compression stroke, you obtain a lift of
the intake valve of
1 mm on the gauge (C). Check that the angular displacement reading matches the specified value
(Sect. C 1.1, Timing system/valves).
Rotate clockwise again until obtaining
1 mm lift of the exhaust valve, on both valve opening and closure.
Check the angular displacement value against the specified value.
Repeat the procedure for the vertical cylinder.
Permissible tolerance for measured values is
±3 ° with respect to specified values.
Remove the tools used to check engine timing.
Operation Section reference
Refit the valve covers N 4.3, Refitting the valve covers
Refit the timing belt covers N 4.2, Refitting the timing belt covers
C
C
G
88765.1581
88713.0123